nixos-x13s/module.nix

{
  config,
  lib,
  pkgs,
  ...
}:
let
  cfg = config.nixos-x13s;

  x13sPackages = import ./packages/default.nix { inherit lib pkgs; };

  dtbName = "sc8280xp-lenovo-thinkpad-x13s.dtb";
  linuxPackages_x13s = pkgs.linuxPackagesFor x13sPackages."x13s/linux";
  dtb = "${linuxPackages_x13s.kernel}/dtbs/qcom/${dtbName}";

  alsa-ucm-conf-env.ALSA_CONFIG_UCM2 = "${x13sPackages."x13s/alsa-ucm-conf"}/share/alsa/ucm2";
in
{
  options.nixos-x13s = {
    enable = lib.mkEnableOption "x13s hardware support";

    bluetoothMac = lib.mkOption {
      type = lib.types.str;
      description = "mac address to set on boot";
    };
  };

  config = lib.mkIf cfg.enable {
    environment.systemPackages = [ pkgs.efibootmgr ];

    hardware.enableAllFirmware = true;
    hardware.firmware = [ x13sPackages."x13s/extra-firmware" ];

    systemd.services.pd-mapper = {
      wantedBy = [ "multi-user.target" ];

      serviceConfig = {
        ExecStart = "${lib.getExe x13sPackages.pd-mapper}";
        Restart = "always";
      };
    };

    environment.sessionVariables = alsa-ucm-conf-env;
    systemd.user.services.pipewire.environment = alsa-ucm-conf-env;
    systemd.user.services.wireplumber.environment = alsa-ucm-conf-env;

    boot = {
      loader.efi.canTouchEfiVariables = true;
      loader.systemd-boot.enable = lib.mkDefault true;
      loader.systemd-boot.extraFiles = {
        "${dtbName}" = dtb;
      };

      kernelPackages = linuxPackages_x13s;

      kernelParams = [
        # needed to boot
        "dtb=${dtbName}"

        # jhovold recommended
        "efi=noruntime"
        "clk_ignore_unused"
        "pd_ignore_unused"
        "regulator_ignore_unused"
        "arm64.nopauth"

        # blacklist graphics in initrd so the firmware can load from disk
        "rd.driver.blacklist=msm"
      ];

      initrd = {
        kernelModules = [
          "nvme"
          "phy-qcom-qmp-pcie"
          "pcie-qcom"

          "i2c-core"
          "i2c-hid"
          "i2c-hid-of"
          "i2c-qcom-geni"

          "leds_qcom_lpg"
          "pwm_bl"
          "qrtr"
          "pmic_glink_altmode"
          "gpio_sbu_mux"
          "phy-qcom-qmp-combo"
          "gpucc_sc8280xp"
          "dispcc_sc8280xp"
          "phy_qcom_edp"
          "panel-edp"
          # "msm"
        ];
      };
    };

    nixpkgs.overlays = [
      (_: super: {
        linux-firmware =
          let
            source = {
              revision = "5217b76bed90ae86d5f3fe9a5f4e2301868cdd02";
              sourceHash = "sha256-Te5AioCoN2LuUwxuxjoarpihaZQ1uO/FRfVrkNVGwEQ=";
              outputHash = "sha256-F1f4gcGU3ATnDEFoHipS25qqBD8XsKfrCDzaFbNWgXI=";
            };
          in
          super.linux-firmware.overrideAttrs (
            _: {
              version = "20240205-unstable";
              src = pkgs.fetchzip {
                url = "https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/snapshot/linux-firmware-${source.revision}.tar.gz";
                hash = source.sourceHash;
              };
              outputHash = source.outputHash;
            }
          );

        # don't try and use zfs
        zfs = super.zfs.overrideAttrs (_: { meta.platforms = [ ]; });

        # allow missing modules
        makeModulesClosure = x: super.makeModulesClosure (x // { allowMissing = true; });
      })
    ];

    # default is performance
    powerManagement.cpuFreqGovernor = "ondemand";

    systemd.services.bluetooth = {
      serviceConfig = {
        # disabled because btmgmt call hangs
        # ExecStartPre = [
        #   ""
        #   "${pkgs.util-linux}/bin/rfkill block bluetooth"
        #   "${pkgs.bluez5-experimental}/bin/btmgmt public-addr ${cfg.bluetoothMac}"
        #   "${pkgs.util-linux}/bin/rfkill unblock bluetooth"
        # ];
        RestartSec = 5;
        Restart = "on-failure";
      };
    };
  };
}